Over the years we have received numerous requests for Eichler fencing. As many folks know, the Eichler fence is difficult to get. Minton's lumber was producing it, but is no longer is business.

Below is a photo of the unique Eichler Fence.
This is milled out of 1x8, (measures an actual 7 1/4" width)
Kiln Dried Tight Knot Cedar.
As you can see it paints very well. This Eichler fencing is milled with the unique Eichler vertical groove and overlaps at each joint. Just like the original Eichler fence.

In the past, most homeowners were forced to use plywood siding for fencing or having fencing custom milled.

The quality of this Eichler fencing material is much better than "fence grade" and it mills beautifully!

Currently available in 4', 6' and 8' lengths. Please scroll down to detailed views.

The 6 foot fence you see below was installed by Bob Hart of Robert Hart Construction 415-310-0677.

If you have questions or comments please call or email us.

Email us at jeff@eichlersiding.com or call us at 415-883-5300.

These pictures show it before it has been painted. Once it is, the tight knots will not be seen at all. Stay tuned.

End View: Shows milled grooves on both sides, standard pattern is one side only.
Grooves are 3/8" wide, 3/8" deep and 2-1/4" on center. Each board is 7-1/4" wide
and is milled to overlap the next board creating a real privacy fence.